|
5869
Product Description:
The
5869 Holdup Switch/Transmitter is a finger-operated RF
transmitting device. It is typically mounted under a counter or
money draw for inconspicuous operation. When the transmitter is
activated, it emits an RF signal to the receiver. The security
system control panel sends a burglary alarm to the central
station when a RF signal is received from an enrolled Holdup
Switch/Transmitter. Once activated, the 5869 Holdup
Switch/Transmitter can only be reset by the reset key. The 5869
also incorporates tamper switches that are activated when the
cover is removed, or if the unit is forcibly removed from its
installation location.
Features:
- Front and back tamper
resistant
Specifications:
- Physical (HxWxD):
1-15/16" x 5-15/16" x 1-3/16" (50mm x 150mm x 30mm)
- Battery: 3-volt
Lithium. ADEMCO 466 or equivalent.
- Agency Listings: UL
Listed for Household Burg UL1023 and Hold Up Burg UL636.
Using 5881ENHC with appropriate ADEMCO commercial listed
panels
*Prices are subject to change in accordance to exchange rate
|