Vista-128B

Vista-128B

Rs.0

• ADEMCO’s VISTA-128B is an eight-partition, UL/CUL Commercial Burglary Control Platform that supports up to 128 zones using basic hardwired, polling loop, and wireless zones. It also includes zones for supervision of bells, keypads, RF receivers, and relays. In addition, the control offers scheduling capabilities and allows certain operations to be automated by pressing a single button. The system has the capability to interface with an ECP Long Range Radio unit that can send Contact ID messages and an alphanumeric paging device. When connected to ADEMCO’s PassPoint system (via the Vista Gateway Module), the VISTA-128B provides a fully integrated security and access control system.

• Provides nine style-B hardwired zones
• Supports up to 119 additional zones using a built-in polling (multiplex) loop interface
• Can control up to eight separate partitions independently, each functioning as if it had its own separate control
• Accommodates 150 user codes with seven authority levels
• Supports up to 128 wireless zones using a 5881 type RF receiver (fewer if using hardwired and/or polling loop zones)
• Supports the 5817CB Wireless Commercial Transmitter
• Supports the 5869 Wireless Commercial Burglary Hold-up switch
• Supports the 5881ENHC Wireless Commercial receiver
• Accommodates 32 keypad macro commands per system
• Keeps a log of up to 512 events
• Supports up to 16 two-wire smoke detectors on zone 1
• Supports up to 50 latching-type glass-break detectors on zone 8
• Integrates with Pass-Point access control to provide increased users, event log, and scheduling
• Supports addressable Vista-Key access control (up to 8 doors)
• Easily programmed and maintained using Compass Windows-based downloader
• Supports the ADEMCO 4286 VIP Module

• Physical: 14-1/2" (W) x 18" (H) x 4.3" (D)
• Electrical:
• Voltage Input: From ADEMCO No. 1361 Plug-In Transformer (use 1361CN in Canada) or 4300 transformer (for X-10 installations) rated 16.5VAC, 40 VA (For Canada use 1361CN transformer w/PSC04 for X-10 installations)
• Alarm Sounder Output: 10V DC-13.8V DC, 1.7 amps max., (UL1023, UL609 installations); 750mA less aux. current draw (UL985 installations)
• Auxiliary Power Output: 9.6V DC-13.8V DC, 750mA max. For UL installations, the accessories connected to the output must be UL Listed, and rated to operate in the above voltage range
• Backup Battery: 12V DC, 4AH or 7AH gel cell. YUASA NP4-12 (12V, 4AH) or NP7-12 (12V, 7AH) recommended
• Standby Time: 4 hours min. with 750mA aux. load using 7 AH battery
• Circuit Protectors: PTC circuit breakers are used on battery input to protect against reverse battery connections and on alarm sounder output to protect against wiring faults (shorts). A solid state circuit breaker is used on auxiliary power output to protect against wiring faults (shorts)
• Digital Communicator
• Formats Supported: ADEMCO High Speed, ADEMCO 4 + 2 Express, ADEMCO Low Speed, ADEMCO Contact ID, Sescoa and Radionics Low Speed
• Line Seize: Double Pole
• Ringer Equivalence: 0.7B
• 6139 Remote Keypads/6160 Alpha Keypad
• Physical:
• Width: 6.25 inches
• Height 4.75 inches
• Depth: 1.25 inches
• Electrical:
• Voltage Input: 12V DC
• Current Drain: 100 mA
• Interface Wiring:
• RED: 12V DC input (+) auxiliary power
• BLUE: Not used
• GREEN: Data to control panel
• YELLOW: Data from control panel
• BLACK: Ground and (-) connection from supplemental power supply
• Optional Equipment: See ADEMCO Group control accessories compatibility chart for complete list.
• 4100APG Alpha Paging
• 7845C Alarm-Net Control Channel Cellular Radio
• 7820 Long Range Radio (7830RCN in Canada)
• 4286 VIP Module
• 5881 RF Receivers
• Power-line carrier devices
• 6220S Serial Printer

*Prices are subject to change in accordance to exchange rate