9500-SN

9500-SN

Rs.0

• ADEMCO’s 9500SN addressable dual technology glass-break sensor provides superior false alarm immunity without compromising detection. By using two separate microphones to sense both flex (ultra-low) and audio (ultra-high) frequencies, the 9500SN is able to listen to the entire glass-break frequency spectrum while virtually eliminating false alarms. Designed for convenience as well as reliability, the low profile sensor can be mounted nearly anywhere - including suspended ceilings - using Ademco’s addressable polling loop technology. The 9500SN also includes a microphone supervision that continually monitors performance.
• ADEMCO’s 9500SN is a serial number polling loop device compatible only with the popular VISTA family of control panels, including the 32FB, 100, 128B, 128FB, 40, 50P, and 50PUL.

• Dual flex/audio technology
• Serial number addressable for polling loop
• Mounts virtually anywhere
• Advanced Acoustic Filter for microphone overload protection
• Separate microphones for audio and flex detection self test circuit
• Circuit Protection to prevent surges on polling loop
• Two Wire Operation-no separate power required
• Cover Tamper Switch

• Range: 9500SN 30’ (9m)
• Alarm Output: Electronic output via ADEMCO two wire polling loop
• Tamper Switch: Electronic output via ADEMCO two wire polling loop
• Power Requirements: Derived from ADEMCO two wire polling loop to controller 1.78 mA (1 sensor current load)
• Operating Temperature: 32° to 120°F (0° to 49°C)
• Dimensions: 4.06” (H) x 2.52” (W) x 0.79” (D) (103mm x 645mm x 20mm)
• Weight: 2.6oz (74g)
• Packaged Product: 3.8oz (107g)
• Approvals: UL listed,CE
• TESTER: Ademco# GBS7 or C&K# FG701

• Protected Glass: Minimum size for all types is 11” (28cm) square: Glass must be frame mounted to walls, doors or ceilings